Fake ID
Information |
|
 Fake
id and identification can be bought and made online. The best fakeid is printed on PVC card
stock and hologram driver license lamination, as they are very difficult to produce outside of
a modern card-printing identity lab. Which brings us to why I created this site.
There are companies that state that you can buy fake id or novelty ids for all 50
states, but do not trust any company that takes credit cards. This is fine if you are buying a new laptop, but not when you want to
buy fake id. Any real novelty id site will take cash or maybe checks for fakeids to protect them
from being shut down. Never buy a fake id from any site with a mailing address
in the USA or its neighbor Canada. Any site located there will be a guarantee of
a scam rip off or poor quality fake id that will not be a fake ids of any use.
|
 |
Fake ID Club |
|
|
|
|
 |
|
 |
TOP RATED FAKE
ID SOURCES AND REVIEWS |
|
 |
Featured ID
Information |
|
 |
Top FakeIDs |
|
Fake ID
Obtain necessary supplies online
Find and edit the fake id template
Search a Peer-2-Peer network such as Kazaa, LimeWire or BitTorrent to find a
template. By using Adobe Photoshop or Macromedia Fireworks, or a free program
like GIMP, you should easily be able to edit the templates.
You should begin editing by changing the text fields. Most standard fake IDs use
the font Arial that comes with Windows but if you wish to use specialty fonts
that do not come with Windows (such as a font for id signatures) you can see how
to download and install them by reading this article: Install Fonts On Your PC.
Edit the fake ID eye and hair color fields as follows:
Eye Color- Indicate eye color abbreviation:
BLK - Black
GRY - Gray
MAR - Maroon
BLU - Blue
GRN – Green
PNK - Pink
BRO – Brown
HAZ - Hazel
MUL – Multicolor
ID Hair Color- Indicate hair color abbreviation:
BAL – Bald
BRO – Brown
SDY - Sandy
BLK - Black
GRY - Gray
WHI - White
BLN – Blonde
RED – Red
Also, if your fake ID has restrictions or endorsements here are the codes. Some
are rarely used but others, like restriction code B are quite common. Here are a
list of some of the more popular codes for your fake id:
Fake ID Restriction codes:
A - No Restriction
B - Corrective Lens
C - Mechanical Aids
D - Business Only
G - Daylight Only
H - Employer's Vehicle Only
J - Prosthetic Aid
Q - No Passengers
R - motorcycles 500 cc & under
S - to & From School
T - To & From Medical
U - all motorcycles except Class X
2 - Personal Vehicles Only
Endorsement codes are less common for fake id but include:
M - Motorcycle endorsement for any motorcycle regardless of engine displacement.
P - Passenger vehicles designed to carry 16 or more persons, including the
driver.
T - Double/triple trailers allowed.
Y - Farm endorsement (Class A).
Scan in the photo and signature image files
You need to scan in a passport photo or other acceptable fake ID picture. Also
scan in a signature. If the background of the passport photo does not match the
background of the fake state id, you will need to do some editing of the fake
driver license.
After scanning the passport photo into the computer, the person's fake id face
will need to be separated from the background so it flows seamlessly with your
ID card template. Using a program such as Adobe Photoshop, Macromedia Fireworks,
or GIMP, provides you with an image editing tool called "Magic Wand". This tool
will allow you to click a color in the fake id image and it will select all
surrounding colors that are similar or the same. There will be a slider that
will allow you to select the amount of variance from the color you select. The
higher the variance relates to more of the fake id image that will be selected.
Once the background is nearly fully selected without containing any of the
person's face, press 'Delete' on your keyboard to erase it. You can then magnify
the fake id image and use the eraser tool to clean up around the person's face.
At this point, zoom out and copy the fake driver license image. It can be pasted
onto your ID card template. It will then flow seamlessly into your template
design and you can choose any background color you
want!
For more detailed instructions on how to edit facial images for use on id cards,
see this article: Edit Face Images for Use on a Fake ID.
Add a fake id card Barcode
The unusual-looking scrambled barcode on the back of most driver’s licenses is
known as a PDF417 barcode. This barcode contains most of the information
contained on the front of the license. By editing this readout, you can encode
your information into this barcode. You can generate these barcodes by finding a
free PDF417 Generator online. Below is the general sequence.
Add a Magnetic Stripe
If your license requires a magnetic stripe and you want it to be scannable fake
driver license image, it can be encoded with an encoder. Generally these are
very expensive and are difficult to find. However, you can get the EasyIDea
Magnetic Stripe Encoder for less than $400 bucks. There are two types of
magnetic stripes, HiCo and LoCo. HiCo and LoCo magnetic differ in that HiCo are
much more difficult to demagnetize. The encoders for these typically were much
more expensive than for LoCo. Most HiCo encoders encode LoCo stripes as well.
The best way to program the stripe is to decode a working driver’s license, edit
the data, and then program it back onto the stripe. Encode the magnetic stripe
after the card is finished.
After editing is done, you can start printing your fake id card
You will need to print on a synthetic paper. There are two types of synthetic
paper that are nearly the same. Teslin and Artisyn paper are single layer,
silica-filled, polyolefin printing substrate with unique microporous and
temperature resistance features that make it the product of choice for laminated
fake ID badges. Teslin is more expensive than Artisyn and much less versatile.
If you want to use a desktop inkjet printer, you will achieve better results
with Artisyn or Artisyn NanoExtreme™ synthetic paper. Printing on Teslin with an
inkjet does not work well and tends to look grainy and smear. The Artisyn and
Artisyn NanoExtreme™ are coated with chemicals to absorb the ink effectively. It
is cheaper than Teslin, works well with all types of printers including inkjet
and laser printers. It also tends to produce better print quality fake driver
license results. Teslin can be found at PoisonID.com and Artisyn can be found at
ArcadiaID.com. Arcadia also sells perforated sheets that punch out in the size
of the fake ID cards.
Select your printer. The preferred method is to use a pigmented based inkjet
printer like an Epson printer with DuraBrite ink. This tends to produce
incredible id card results and works well with Teslin even though it is not a
laser printer. Better results are still achieved on Artisyn paper, and for the
highest quality results Artisyn NanoExtreme™ should be used. If a pigmented ink
printer is not available, a laser printer is still a good result. Laser printers
produce sharp and clear results, but the ink tends to look waxy. Lastly, any
dye-based inkjet printer will work fine for fakeid. A dye-based inkjet printer
is that standard color printer that most people have in their home. Again, if
you use dye-based inks make sure to use Artisyn. You should print on highest
quality photo settings for your id cards.
Print on one sheet of paper, both front and back fake driver license.
Cutting fake id.
If you are using EasyIDea Microperforated Artisyn, you can skip this tedious
step. Otherwise, start by cutting out the ID from the paper. Tracing the
dimensions of the ID using a butterfly pouch is generally helpful. A paper
cutter or X-Acto knife is also helpful. After cutting sheets by hand for a
while, I decided I’d rather use the punch-outs.
Laminate fake id.
You must use thermal laminating in order to bond the butterfly pouch to the
synthetic paper. Once laminated, the card will harden and resemble a PVC card.
You must use a thermal (heat) pouch laminator. Avery, Arcadia EasyIDea, or GBC
makes good ones that run around $50. If you can't afford a laminator then you
can use a standard home iron. This is a little more tricky as you have to make
sure the iron doesn't get so hot that it melts the laminate plastic but is still
hot enough to bond the laminate to your ID card. Also be sure the iron does not
have any water loaded into it as this could damage the ink on the pre-laminated
ID and the steam could warp the novelty ID card.
Place the insert into the butterfly pouch. You must place the novelty id card
into a carrier. Run the carrier through the laminator. Immediately following
lamination, it is helpful to place the card under something flat like a book so
that it cools flat.
Apply a fake id hologram.
Generally, it is acceptable to use a generic hologram. Very few people actually
examine the hologram and read what it says on it. I have had my fake for over
two years with a generic hologram on it and I have never had a problem. If
you’re concerned about making something that looks truly authentic, there are
other methods to replicate holograms. The Shield and Key fake id hologram is the
most commonly used generic novelty id hologram and is a transparent rainbow id
hologram. This means that it looks transparent when looked at directly but when
tilted to the sides the hologram lets off a rainbow spectrum. This is my generic
hologram of choice when making fakes. This type of fake id hologram is pretty
much impossible to duplicate using the Pearl-Ex method below.
Making a fake id Hologram
The gold holograms on many ID cards are called binary id holograms. These id
holograms can be easily reproduced using Pearl-Ex paint and Photo-EZ paper.
This product is for making fake stencils. A stencil is basically the outline of
a picture with the negative part missing. To make the fake stencil you scan the
fake hologram off your id, then convert it to an all black fake id image. Next
you print the image on a transparency. A transparency is a transparent sheet of
plastic meant for inkjet printers or lasers. Then you take the transparency and
tape it to the Photo-EZ. You put it out in the sun and all the areas of the id
card material not covered by the black negative of the holo cures. When washed
the part covered by the negative washes away, leaving you with your stencil. You
will want to order the high resolution material. This product can be ordered
from cBridgeand more information can be found there.
As for the painting material, the two main ones are Interference Gold (Fine)
made by Golden Acrylics and PERL-EX DUOTONE. The latter of the materials work
best because of the fact it reflects two colors of the spectrum. Perl-Ex comes
as a powder and preparation is needed. These paints are transparent when viewed
from straight on. When viewed from different angles you see different colors
depending on the particular colors of the paint. Perl-Ex comes in Duo Red-Blue,
Duo Blue-Green, and Duo Green-Yellow. Perl-Ex is available in a lot of places.
You have to buy a Transparent Base made for paints to prepare the Perl-Ex. A
good one is Speedball Transparent Base. You mix in a 1:50 ratio. 1 part Per- 50
parts base. If you are using Golden acrylics for fake id then you use a 5:1
ratio. 5 parts paint 1 part base. When applying the paint in the stencil, you
should use if possible one of those brushes made for screen printing. It is like
a pencil but with a flexible tip. A sponge can be used but extra care needs to
be taken when applying to fake id. You want to apply a very thin amount and
practice will be needed to get it right.
On a lot of the new fake ID's there is a multicolored hologram card that
reflects the full spectrum (like a rainbow). This is especially true of most of
the Canadian ids. What you do is pick the two most dominant colors and buy the
matching Perl Ex colors. This will be good enough to reproduce the holo. The
holo can be put directly on the finished ID or before lamination on the inside
of the pouch. If you choice is the inside then remember to put it in the
reverse.
You’re ready for the finishing touches.
It is recommended that you sand the edges of the fake hologram with a very fine
grit sandpaper. This removes the jagged edges of the synthetic paper. You should
lightly sand the front and back of the id to give it a more worn look.
These instructions were to make a 30 mil fake drivers license that resembles a
PVC card. If you want to make something thinner that bends corner to corner like
some fake ID cards, you can remove the front part of the butterfly pouch and
simply laminate the back of the pouch with the synthetic paper. Many machines
use this method, but it can be accomplished manually. You can also replicate
fake signature strips by scratching the surface of the butterfly pouch with
sandpaper.
Have fun and don’t be an idiot with your ID. |
 |
Get the latest updates on
fake id
at